Pulse Heat Bonding Machine – A Number Of Recommendations On Choosing an Inline Hotbar Machine.

Pulsed heated hot bar reflow soldering is hot bar soldering equipment through which two solder plated parts are pressed together and heated to your temperature adequate to result in the solder to melt and flow, then the parts are cooled to form a permanent electro-mechanical bond. Pulsed heated soldering is different from traditional soldering because the reflow of solder is accomplished using a heating element referred to as a “thermode” that is quickly heated and after that cooled off for every single connection resulting in strong joints. Pressure is applied through the entire cycle contributing to precise positioning. In addition, it helps make the process suitable for parts that could otherwise disconnect during cool off. Hot bar reflow soldering is another sensible choice for applications which need multiple connections to get made simultaneously; as much as 200 leads or wires could be connected in a single process cycle. Hot bar reflow soldering processes are reproducible, quantifiable, and traceable to quality standards including ISO / NIST. Hot Bar reflow soldering is safe, highly operator-independent and straightforward to automate.

Heat seal bonding – also called ACF bonding – is the procedure of developing electrical conductive adhesive bonds between flexible and rigid circuit boards, glass panel displays and flex foils with very fine pitch (<30 micron). The essential characteristics of inline hotbar machine are heating and cooling of the adhesive under pressure.

Heatstaking is a method of joining two or more parts, where at least one is made out of plastic. The bond is made by partially de-forming the plastic part to fix the other. Heatstaking is the most efficient way to bond metal to plastic, and is commonly used in high volume/low cost applications in the automotive, telecom and 16dexgpky industries. The process works by heating the plastic to a temperature above the glass transition temperature via the use of super-heated air or a thermode, and then applying pressure in order to deform it and create the stake. The plastic is then cooled down again – under constant pressure – below the glass transition temperature, ensuring good fixation of the parts. This cooling can be done with compressed air if using a thermode, or with a cold, preformed tool if super-heated air is used.

Amada Miyachi offers a full line of automatic soldering machine, bonding heads for benchtop use or for integration or automation, thermodes, and both standard and custom systems for reflow soldering, heat seal bonding and heat staking.